How To: Install Magldr and Android to Internal Memory (Nand) on HD2

In order to install NAND Android on HTC HD2, you must install DFT MAGLDR Bootloader first. And the good news ~ both LEO512 and LEO1024 are supported. This means US T-Mobile HD2, Europe, Asia and the rest of the world’s HTC HD2 are supported.

Note – by installing MAGLDR, you cannot boot into Windows Mobile 6.5 anymore. And Android on SD card is not working on MAGLDR v1.11. I tried 2 builds ~ Android booted and hang there. So everything on your phone is gone…

Step by Step Guide forinstalling Magldr :

• Power off your phone.
• Press volume down button (don’t let go) and power on your phone.
• It will load into bootloader.
• You should get ‘Red, Green, Blue and White’ screen with SPL-2.08.HSPL.
• Take off the battery.
• Power on your phone.
• You should have R 2.15.50.14 at bottom of the screen with green HTC Logo.
• Connect USB cable from PC to phone after Windows Mobile loaded.
• Select ‘ActiveSync’ and click ‘Done’.
• Open DFT_LEO_MAGLDR111.rar with 7-Zip.
• Copy MAGLDR111 folder to desktop.
• Enter MAGLDR111 folder.
• Execute ROMUpdateUtility.
• Click ‘Yes’ if User Access Control prompt up.
• Follow onscreen instructions to install.
• Bootloader will be loaded with USB status during starting of installation.
• Phone will be rebooted after installation finished.
• DFT MAGLDR Bootloader will be loaded then.
• Disconnect USB cable from phone.
• That’s all.

Download DFT LEO MAGLDR Bootloader v1.11 here.

We don’t need to boot into Windows Mobile 6.5 first then load Android anymore. But this means we can’t use Windows Mobile 6.5 anymore and until Windows Phone 7 ROM comes out. You are stuck with Android only if you install DFT MAGLDR Bootloader and NAND Android ROM for HTC HD2. Do you still want to continue?

Step by Step Guide to install NAND Android :

• Power on your phone.
• DFT MAGLDR Bootloader will be loaded.
• Use volume down button to go down to 4. USB Flasher.
• Then press call button to load Android Flasher mode.
• Connect USB cable from PC to phone.
• Open DFT_LEO_NAND_Android.rar with 7-Zip.
• Copy DFT_Android folder to desktop.
• Enter DFT_Android folder.
• Execute DAF.
• Follow onscreen instructions to install.
• Click ‘Yes’ if User Access Control prompt up.
• Phone will be rebooted after installation finished.
• DFT MAGLDR Bootloader will be loaded then.
• Use volume down button to go down to 2. Boot AD NAND.
• Then press call button to load NAND Android.
• Disconnect USB cable from phone.
• Follow onscreen instructions to setup Android settings.
• That’s all.

To make auto boot to NAND Android.

• Restart your phone.
• Load to DFT MAGLDR Bootloader
• Use volume up button to go up to 8. Services.
• Then press call button to load Services Menu.
• Then press call button again to enter AutoBoot settings.
• Then press call button again to enter Boot source settings.
• Select 2. Android from NAND with call button.
• Use volume up button to go up to 8. Services again.
• Then press call button to load Services Menu.
• Then press call button again to enter AutoBoot settings.
• Select 2. AlwaysMenu with call button.
• Press power on/off button to select NO at Show boot menu always at boot?
• Use volume up button to go up to 9. Reset.
• Phone will be rebooted and enter NAND Android automatically.
• That’s all.

Download LEO “Stock” NAND Android ROM here.

Thanks to Jayce Ooi's Paradise for explaining the steps.